This of course corresponds to the current trend of the smart home. One such option is the use of a cell phone and now it does not involve high costs. The thermostats with the WiFi control function now do not cost much more than thermostats without such a function.
Hanging the panels with the mounting brackets included in the set is very easy, just need to drill 4 holes. However, connecting thermostats requires electrical qualifications or some technical skills.
We always recommend mounting the panels on the ceiling if possible. When mounted on the ceiling, the heaters disappear from view, the walls are not covered with panels, and when mounted on the ceiling, the heat is distributed very evenly throughout the room, reaches the floor first and increases its temperature in a pleasant way. When installing panels on the ceiling, try to arrange them as evenly as possible so that they look nice and symmetrical on the ceiling. If there is only one heater intended for a certain room, we of course first mount the lamp in the middle and, in the second step, mount the heater slightly to the left or right of the lamp.
Thermostats can be mounted anywhere so that they are easily accessible for temperature measurements and changes, and in a location where temperature measurement is reliable. However, we recommend installing thermostats near light switches to group switches and thermostats in one location.
Of course, infrared heating panels can be used to heat individual rooms, but the heater installed in one room should not be expected to heat the adjacent rooms.
Of course, infrared heaters can also be used as additional heating, in which case we use a value of 15 W/m3 as the basis for calculating the necessary power.
Of course, infrared heaters can also be used to heat rooms in transitional periods. In this case, we use a value of 15 W/m3 as the basis for calculating the necessary power.
If you are in the construction or renovation phase, you can take advantage of this moment to prepare power cables (wiring) hidden in the wall for heating. And after the final preparation of the rooms, panels will be hung on the walls or ceiling, thermostats will be installed next to the light switches and the wiring will then remain hidden in the walls, out of sight.
The heater stand shown in the picture must be ordered separately.
